I changed the FFI sequence 2 to the following.  This very standard 
sequence is not to give a surprise to Loren, who will check the images 
on Thursday/Friday.

I think I now know how to take high-cadence Q-res images mostly long 
exposure.  You change the filter for 2-2 and 3-1 back to 3/1 and increase
the loop counter LOOP3 to 8.  You may also consider not taking 4-1 (DPE,
filter same as the flare patrol), 4-2 (for XBP), 5-3/4 (Al movie images).



  SOLAR-A SXT OPERATION SUPPORT SYSTEM(FFI SEQUENCE1/2)     00.03.28 17:00:46 
       ENTRY NO. 2                       RECEIVE DATE/TIME  00.03.28 02:43:08 
  LOOP2 NO:  1       LOOP3 NO:  8 1     LOOP4 NO:  1       LOOP5 NO:  1 5   
         DPE      B/A       RCN      FFI  EXP    BLS        FLS      SHT   ASP 
 1-1    25 23  5/1 4 / 1  HC1N        1  N     OF     4/1/1        ME     U   
  2-1    4     1/5   /    QC1N        3  D     OF     F/2/3        ME     U   
  2-2    9     3/1 7 / 7  QC1N        3  N     OF     4/1/1        ME     U   
   3-1  21     3/1 7 / 7  QC1N        3  N     OF     4/1/1        ME     U   
   3-2  11     7/7   /    HC1N        1  N     OF     4/1/1        ME     U   
   3-3   2     7/7   /    FC1N        1  N     OF     F/2/3        ME     U   
   3-4   2     7/7   /    FL1N        1  N     OF     F/2/3        ME     U   
  4-1   11     5/1   /    QC1N        3  N     OF     F/2/3        ME     U   
  4-2   30     3/1   /    HC1N        1  N     OF     4/1/1        ME     U   
   5-1  11     3/1   /    HC1N        1  N     OF     4/1/1        ME     U   
   5-2  25     3/1   /    HC1N        1  N     OF     4/1/1        ME     U   
   5-3  21     2/1   /    HC1N        1  N     OF     4/1/1        ME     U   
   5-4   9     2/1   /    HC1N        1  N     OF     4/1/1        ME     U   
 DPE:DP EXPOSURE LEVEL   B/A:FILTER B/A 
 RCN:RESOLUTION/COMPRESSION/NO OF ROI/N 
 EXP:EXPOSURE MODE(N=NORMAL,D=DARK,C=CAL) FLS:FLUSH COUNT(PRE-ROI/FULL/PRE-EXP) 
 FFI:FFI MODE(0=512KB,1=256KB,2=128KB,3=064KB) BLS:BLS ON/OFF 
 ASP:ASPECT SENSOR COVER(C=COVERED,U=UNCOVERED) 
 SHT:SHUTTER MODE(ME=MECHANICAL,FT=FRAME TRANSFER)