27 November 1995 S. Savy L. Acton SXT CHIEF OBSERVER REPORT AND TABLE PLAN SXT CHIEF OBSERVER'S REPORT for Week 47: 20-NOV-95 to 26-NOV-95 SOLAR ACTIVITY The Sun was very quiet this week with only one active region (AR7926) on the disc. SXT INSTRUMENT STATUS A CCD bake out was carried out for one day on Wednesday 22 November. The CCD was cooled to normal operating temperature on Thursday. The bake out was successful, and SXT continues to function normally. CAMPAIGNS No campaigns in week 47. SEMINARS There was no seminar this week. SXT TABLE PLAN FOR WEEK 48 (27-NOV-95 to 3-DEC-95) There will be a DKCAL table on Tuesday. On Friday and Saturday we will attempt 2 visible orbits each day of PFI-dominant observations to obtain observations of an actve region with 2 second time resolution in a single filter. These data will be used by David McKenzie of U. Delaware for investigation of wave heating of AR loops as part of his PhD thesis research. This campaign will be postponed if there is no appropriate AR on the disk at the time. This week we continue with the terminator program, for which we request preparation and upload of new offpoint OG files. The provisional SXT Table Plan for the week is as follows: KSC Time (start) in JST Pass Table ID _____________(= UT + 9 hrs)______#_______________________________ Monday 27-NOV-95 No table load Tuesday 28-NOV-95 20:45 3 951128 P3 ARS1 DKCAL Wednesday 29-NOV-95 21:05 3 951129 P3 ARS1 STD+LONG Thursday 30-NOV-95 19:41 3 951130 P3 ARS1 STD+LONG Friday 1-DEC-95 16:35 2 951201 P2 ARS2 HI TIME RES Friday 1-DEC-95 20:00 4 951201 P4 ARS1 STD+LONG Saturday 2-DEC-95 16:54 2 951202 P2 ARS2 HI TIME RES Saturday 2-DEC-95 20:20 4 951202 P4 ARS1 STD+LONG SSOC TOHBAN, please fax the preliminary OP list to D-tou when it contains a terminator so that the Chief Observer can suggest which OG's to be used. Dumping Patrol images: We request that KSC tohban continue to dump a patrol image each time an SXT table is loaded to facilitate the study of optimizing ARS parameters for an awfully quiet period. NEW OG COMMANDS REQUIRED FOR SXT TERMINATOR PROGRAM SSOC TOHBAN, please prepare the following offpoint OGs and upload them as soon as possible. ******************************************************************** OG-33 (Decimal) TARGET ANGLE-X -0.0920863 (DEG) TARGET ANGLE-Y 0.0310329 (DEG) BLOCK COMMAND ===> 81 00 F9 7F 02 08 00 00 -0.766512 -0.0346850 COMMAND NAME: S/C W.034 N.766 (offset angles in arcmin) ----- OG EDITOR OUTPUT --------------- NUMBER : 33 NAME : S/C W.034 N.766 1 04-DC-8A ACS: ACP DATA SET+B7 2 04-BC-81 ACS: BC 3 04-BC-F9 ACS: BC 4 04-BC-7F ACS: BC 5 04-BC-02 ACS: BC 6 04-BC-08 ACS: BC 7 04-BC-00 ACS: BC 8 04-BC-00 ACS: BC 9 04-DC-11 ACS: BC EXEC +++ ******************************************************************** OG-34 (Decimal) TARGET ANGLE-X -0.0881919 (DEG) TARGET ANGLE-Y 0.0324862 (DEG) BLOCK COMMAND ===> 81 00 F9 C5 02 22 00 00 -0.532847 0.0525145 COMMAND NAME: S/C E.052 N.532 (offset angles in arcmin) ----- OG EDITOR OUTPUT --------------- NUMBER : 34 NAME : S/C E.052 N.532 1 04-DC-8A ACS: ACP DATA SET+B7 2 04-BC-81 ACS: BC 3 04-BC-F9 ACS: BC 4 04-BC-C5 ACS: BC 5 04-BC-02 ACS: BC 6 04-BC-22 ACS: BC 7 04-BC-00 ACS: BC 8 04-BC-00 ACS: BC 9 04-DC-11 ACS: BC EXEC +++ ******************************************************************** OG-35 (Decimal) TARGET ANGLE-X -0.0836708 (DEG) TARGET ANGLE-Y 0.0297437 (DEG) BLOCK COMMAND ===> 81 00 FA 16 01 F1 00 00 -0.261581 -0.112038 COMMAND NAME: S/C W.112 N.261 (offset angles in arcmin) ----- OG EDITOR OUTPUT --------------- NUMBER : 35 NAME : S/C W.112 N.261 1 04-DC-8A ACS: ACP DATA SET+B7 2 04-BC-81 ACS: BC 3 04-BC-FA ACS: BC 4 04-BC-16 ACS: BC 5 04-BC-01 ACS: BC 6 04-BC-F1 ACS: BC 7 04-BC-00 ACS: BC 8 04-BC-00 ACS: BC 9 04-DC-11 ACS: BC EXEC +++ ******************************************************************** OG-36 (Decimal) TARGET ANGLE-X -0.0778963 (DEG) TARGET ANGLE-Y 0.0303063 (DEG) BLOCK COMMAND ===> 81 00 FA 7E 01 FB 00 00 0.0848892 -0.0782847 COMMAND NAME: S/C W.078 S.084 (offset angles in arcmin) ----- OG EDITOR OUTPUT --------------- NUMBER : 36 NAME : S/C W.078 S.084 1 04-DC-8A ACS: ACP DATA SET+B7 2 04-BC-81 ACS: BC 3 04-BC-FA ACS: BC 4 04-BC-7E ACS: BC 5 04-BC-01 ACS: BC 6 04-BC-FB ACS: BC 7 04-BC-00 ACS: BC 8 04-BC-00 ACS: BC 9 04-DC-11 ACS: BC EXEC +++ ******************************************************************** OG-85 (Decimal) TARGET ANGLE-X -0.0831784 (DEG) TARGET ANGLE-Y 0.0313611 (DEG) BLOCK COMMAND ===> 81 00 FA 1F 02 0E 00 00 -0.232038 -0.0149960 COMMAND NAME: S/C W.014 N.232 (offset angles in arcmin) ----- OG EDITOR OUTPUT --------------- NUMBER : 85 NAME : S/C W.014 N.232 1 04-DC-8A ACS: ACP DATA SET+B7 2 04-BC-81 ACS: BC 3 04-BC-FA ACS: BC 4 04-BC-1F ACS: BC 5 04-BC-02 ACS: BC 6 04-BC-0E ACS: BC 7 04-BC-00 ACS: BC 8 04-BC-00 ACS: BC 9 04-DC-11 ACS: BC EXEC +++